10.0.0.0.1 Pause Wifi Pause Time - 10.0.0.1 Admin Login

 Many people search for 10.0.0.0.1 when trying to manage their Piso WiFi or router settings. However, this is a common typo. The correct address is 10.0.0.1 .

If you're running a Piso WiFi vending machine or just using one, the 10.0.0.1 portal is where you manage sessions, and the Pause Time feature is one of its most useful functions. This guide explains everything you need to know.

The 10.0.0.0.1 vs. 10.0.0.1 Confusion

10.0.0.0.1 is not a valid IP address . Standard IP addresses consist of four number groups (octets) separated by dots. 10.0.0.0.1 has five, making it invalid. Your browser and router will not recognize it.

Typing this address will usually result in a search query or an error. Always use http://10.0.0.1 in your browser's address bar . This is the correct private IP address used by routers for admin access .

How to Access the Piso WiFi Admin Panel

This is where you manage the system and configure settings like the Pause Time feature.

Step 1: Connect to the Piso WiFi network you want to manage .
Step 2: Open a web browser and type http://10.0.0.1/admin or just http://10.0.0.1 in the address bar .
Step 3: Log in with your admin credentials. For many systems, the default is:

  • Username: admin

  • Password: admin or 123456789 

10.0.0.1 Pause Time: What It Is & How It Works

Piso WiFi Pause Time is a feature that lets users temporarily freeze their internet session timer. This is especially useful so you don't waste minutes while stepping away from your device .

How It Works for Users

  1. Connect to the Piso WiFi network and pay to start your session .

  2. When you need a break, go to http://10.0.0.1 on your browser.

  3. Tap the "Pause" button. The session timer will stop, and your internet connection will be suspended .

  4. When you return, go back to http://10.0.0.1 and tap "Resume" to continue from where you left off .

Note: This feature must be enabled by the admin. If you don't see a "Pause" button, the feature is either disabled or unsupported by the machine .

How to Enable Pause Time as an Admin

  1. Log in to the admin panel at http://10.0.0.1/admin .

  2. Navigate to the portal settings. The exact path depends on your system :

    • LPB Piso WiFi: Portal Settings → Insert Coin Mode → Pause Time .

    • PisoFi: Settings → Session Management → Pause/Resume .

    • Makati PisoNet: Advanced Settings → User Features → Pause Time .

  3. Toggle the feature ON .

  4. You can also set limits, like a maximum pause duration (e.g., 30-60 minutes) or auto-expiry (e.g., 24 hours) .

  5. Save your changes and reboot the system if prompted .

Troubleshooting: When 10.0.0.1 Is Not Working

If you can't access the login page:

  • Check the IP Address: Ensure you are typing 10.0.0.1, not 10.0.0.0.1 .

  • Check Your Connection: Verify you are connected to the correct Piso WiFi network .

  • Clear Your Browser Cache: Try clearing your cache and cookies, or use an incognito/private browsing window .

  • Check the Admin Password: If the default password doesn't work, it may have been changed. You might need to reset the router to factory settings if you have forgotten it.

Conclusion

Successfully managing your Piso WiFi system starts with using the correct IP address: 10.0.0.1 . Remember that 10.0.0.0.1 is a common error. The Pause Time feature offers flexibility for users and value for money, and it is a setting that must be enabled by the admin through the portal at http://10.0.0.1/admin .

Comments

Post a Comment